Vinyl Fence Installation — Maintenance-Free Privacy & Picket
Vinyl fencing is the right choice when you want a solid privacy wall without years of staining and replacing rotted boards. We install heavy-gauge, UV-stabilized vinyl in privacy, semi-privacy, and picket styles across Stuart, Jensen Beach, Jupiter, Palm Beach Gardens, and the broader Martin and Palm Beach County service area.
Why Homeowners and Businesses Choose Our Vinyl Fencing
Every installation is engineered for South Florida's salt air, hurricane wind loads, and brutal UV — not just thrown together with whatever the supplier had on the truck.
Truly Maintenance-Free
No staining, no sealing, no painting. Hose it off twice a year and it looks new. No rot, no termites, no warping from rain cycles.
UV-Stabilized for Florida Sun
Cheap vinyl yellows and gets brittle in three summers. Our material is engineered with titanium dioxide and impact modifiers to hold color and flex for 20+ years.
Full Privacy Heights
Standard 6′ privacy with tongue-and-groove boards eliminates gaps. 4′ and 5′ picket and semi-privacy styles for front yards, pool areas, and HOA-restricted heights.
Wind-Engineered Posts
Solid-vinyl 5″×5″ posts with internal aluminum or steel reinforcement on long runs and corners — not the hollow vinyl posts that bend in a 40 mph gust.
Lifetime Materials Warranty
Manufacturer-backed limited lifetime warranty on the vinyl material against cracking, peeling, splitting, and significant color change.
Multiple Colors & Styles
White is standard. Tan, khaki, and gray are stocked colors. Wood-grain texture and two-tone caps available for upscale looks.
Materials, Colors & Specifications
We only install fencing built to last in Florida — marine-grade hardware, hurricane-rated assemblies, and powder-coat finishes that don't chalk out in three summers.
Virgin Vinyl Compound
We don’t install regrind. Our vinyl is 100% virgin compound with TiO2 UV stabilizers and impact modifiers — verified by ASTM testing.
Reinforced Posts
Solid 5″×5″ vinyl posts with steel or aluminum inserts on gate posts, end posts, corners, and long fence runs (every third post on 6′ privacy in high-wind zones).
Stainless Hardware
Hinges, latches, and gate hardware are stainless or hot-dip galvanized — no rust streaks on white vinyl.
Concrete-Set Posts
Posts dug to 24″ minimum depth (deeper at gates and corners) and set in concrete with a sloped crown to shed water.
Our Installation Process
No surprises, no guesswork. Every project follows the same playbook from the first phone call to the final walkthrough.
- 1
On-Site Estimate
We walk the property line, identify setbacks and underground utilities, confirm HOA color and height requirements, and quote on the spot.
- 2
Permits & Approvals
We pull the county permit and submit the HOA approval package with material specifications and color samples.
- 3
Material Order
Vinyl components are ordered to spec. Standard lead time is 1–2 weeks for stocked colors.
- 4
Install
Posts go in concrete with proper depth and reinforcement, rails and panels go up after cure, gates hung and adjusted last.
- 5
Final Walkthrough
On-site walkthrough, county final inspection coordination, and warranty paperwork.
Pricing & What to Expect
Vinyl privacy fence typically runs $40–$65 per linear foot installed for 6′ standard styles. Picket and semi-privacy run $30–$50 per linear foot. Gates add $400–$1,200 each. Minimum project $750.
Try the Live Cost EstimatorFrequently Asked Questions
Does vinyl fence really last in Florida?+
Quality vinyl (virgin compound, UV-stabilized) lasts 25–30+ years in Florida. The failures you hear about are almost always cheap recycled-vinyl product or undersized hollow posts that flexed and cracked.
Will my vinyl fence turn yellow?+
Our vinyl uses titanium-dioxide UV blockers and is rated against yellowing for the life of the warranty. Cheap import vinyl often yellows within 2–3 years; ours doesn’t.
Can vinyl fence survive a hurricane?+
Properly installed vinyl with reinforced posts and concrete footings handles Florida wind loads. The most common failure mode is undersized post spacing — we engineer to 6′ or 8′ maximum spacing depending on height and exposure.
How tall can a vinyl privacy fence be?+
Standard heights are 4′, 5′, and 6′. Both Martin and Palm Beach Counties typically allow up to 6′ in rear yards and 4′ in front yards — always verify with your specific zoning and HOA.
How much does vinyl fence cost?+
Installed vinyl ranges from about $30/linear foot for 4′ picket to $65/linear foot for 6′ premium privacy. Use our live estimator for an instant quote based on your linear footage and configuration.
Can you install vinyl on a slope?+
Yes — we either step the panels (each panel level with a small drop at the post) or rack the panels (panels follow the slope where the vinyl system supports it). We’ll recommend the right approach during the on-site visit.
Ready for a Real Quote?
Free on-site measurement. No high-pressure sales. Locally owned, 50/50 residential & commercial.