If you\'re searching "how much does a fence cost" and you live anywhere between Vero Beach and Jupiter, this is the guide you need. We\'re a licensed & insured fence contractor who installs fencing across Martin County, St. Lucie County, and Indian River County every single week. These are real Treasure Coast prices — not national averages inflated by New York labor rates or deflated by rural Midwest numbers.
Treasure Coast Fence Costs Per Linear Foot (2025–2026)
Every price below includes professional installation, concrete-set posts, and standard hardware. Permits, gates, and specialty hardware are priced separately but always included in our written quotes.
Chain Link (Galvanized)
$18 – $30/ftMost affordable. 4' or 6' height. Add $3-5/ft for vinyl coating.
Vinyl / PVC Privacy
$25 – $60/ftZero maintenance. 6' privacy is most popular. Premium colors cost more.
Standard Aluminum
$28 – $50/ftPicket style. Pool code compliant. Black, bronze, or white powder coat.
Welded Aluminum
$50 – $70+/ftCustom one-piece panels. Our specialty. Strongest residential option.
Wood (Cedar/Pressure-Treated)
$25 – $45/ftBoard-on-board most popular. Requires maintenance in FL climate.
What Drives Fence Cost Up (and Down)?
The per-foot material price is only part of the story. Here\'s what actually moves your total project cost:
Factors That Increase Cost
- Coastal location — Properties within 5 miles of the ocean need stainless steel hardware ($2-5/ft premium) and deeper post footings in sandy soil.
- Gates — A single walk gate adds $300-$800. A double drive gate adds $600-$2,000. Automatic operators add $1,500-$5,000+ on top of that.
- Terrain — Slopes, roots, rock, and uneven ground increase labor time. Flat, clear lots are cheapest to fence.
- Height — 6-foot fence costs 15-25% more than 4-foot of the same material because of longer posts and more material.
- HOA requirements — If your HOA mandates a specific style, color, or manufacturer, your material options narrow and price may increase.
- Permit complexity — Commercial properties, waterfront lots, and properties with environmental overlays have more expensive permits and longer processing times.
Factors That Decrease Cost
- Longer runs — Fencing 300+ linear feet is cheaper per foot than 100 feet because setup/mobilization costs spread over more footage.
- Simple layout — A rectangular lot with one gate is cheaper than a lot with 8 corners, multiple gates, and level changes.
- Inland location — Properties away from salt air can use standard hardware instead of stainless, saving $2-5/ft.
- Cash payment — We offer a discount for cash or check payment in full before installation begins.
Treasure Coast vs. Other Florida Markets
How does the Treasure Coast compare to other Florida fencing markets?
- Jacksonville (Duval County) — Typically 5-10% lower. Less coastal corrosion factor, slightly cheaper labor market.
- Brevard County (Space Coast) — Very similar pricing. Slightly more competitive due to contractor density.
- Palm Beach County — 5-15% higher. Stricter permitting, higher labor costs, premium market expectations.
- Miami-Dade — 15-25% higher. Miami-Dade has the strictest building code in Florida, which increases both material and labor costs.
What Should Be Included in Your Fence Quote?
When comparing quotes from different fence companies, make sure every quote includes:
- Building permit — Required in Martin, St. Lucie, and Indian River Counties. If a contractor says "no permit needed," that\'s a red flag.
- 811 utility locates — Required by Florida law before digging. Free service, but the contractor must schedule it.
- Notice of Commencement (NOC) — Required for projects over $2,500 in Florida. Protects you from liens.
- Concrete post setting — Every post should be set in concrete, not just driven into sand or dirt.
- Final inspection — The county inspector verifies the fence meets code. Should be included.
- Cleanup and haul-away — All debris, old fence removal (if applicable), and site cleanup.
If a quote seems dramatically lower than others, check what\'s excluded. The cheapest quote often becomes the most expensive project when permits, concrete, and inspections are added later.
Sample Project Costs (Real Treasure Coast Numbers)
150 ft vinyl privacy fence, 6', 1 gate
$5,500 – $10,000Port St. Lucie subdivision
200 ft aluminum pool fence, 54", 2 gates
$7,000 – $12,000Stuart waterfront home
100 ft chain link, 4', 1 gate
$2,500 – $4,000Jensen Beach residential
300 ft welded aluminum, 6', double gate + operator
$22,000 – $35,000Jupiter estate property
80 ft vinyl privacy + aluminum pool fence combo
$5,000 – $9,000Palm City pool home
Get Your Exact Price
These ranges give you a realistic ballpark. For your exact price, you have two options:
Our online estimator gives you a range in 60 seconds. For an exact price, we do free on-site estimates across the Treasure Coast — Stuart, Jensen Beach, Port St. Lucie, Fort Pierce, Vero Beach, Jupiter, and everywhere in between.